Outrigger canoeing

Types of outrigger canoes

A six-person outrigger canoe

A variety of boat types exist, including the OC1, OC2, OC3, OC4 and OC6 (with the respective number of paddlers using a single hull outrigger canoe), and the DC12 or OC12 (with twelve paddlers using a double hull outrigger canoe, two six person canoes rigged together like a catamaran). The shorthand form is also commonly written as V1, V2, V6, etc. (where V refers to vaa).

Single hull outrigger canoes have an ama (outrigger float) connected to the main hull by spars called iako (Hawaiian), iato (Tahitian), or kiato (Mori). The ama, which is usually rigged on the left side, provides stability. The paddlers need to be careful to avoid leaning too far on the opposite side of the ama, as that may cause the canoe to capsize (huli or lumai).

There are also outrigger sailing canoes ranging from smaller three or four person canoes to large voyaging canoes.

Sailing canoes may have one ama, two amas (one on each side, but only one side is normally in contact with the water), or a double hull configuration (like a catamaran).

Paddling roles

In an outrigger canoe the paddlers sit in line, facing toward the bow of the canoe (i.e. forward, in the direction of travel, unlike rowing). The seats are numbered from 1 (closest to the bow) to the number of seats in the canoe, usually 6. The steerer (or steersman or steersperson) sits in the last seat of the canoe (seat 6 in the common OC6) and, as the name indicates, is primarily responsible for steering. The paddler sitting in seat 1 is called the stroke (or stroker) and is responsible for setting the pace of the paddle strokes. The first two positions may also be involved in certain steering manoeuvers.

In an OC1, the single paddler must also steer the canoe. Some OC1s have rudders operated by foot pedals, while OC1s without rudders must be steered by drawing and paddling as needed for steering purposes while paddling to move the canoe forward.

Steerers

A good steerer is able to maintain the straight attitude of the canoe throughout the course of a race, and also keep the boat and the crew safe in rough sea conditions. S/he may also take advantage of water conditions to gain extra speed by surfing. The steerer uses a single bladed steering paddle which has a larger blade than a standard outrigger paddle, is built stronger, and has less or no bend in its shaft. S/he steers by the following methods:

Poking: holding the paddle vertically against the side of the canoe, causing drag on that side to cause the canoe to turn that direction.

Drawing: paddling at a 45 to 90 degree angle to pull water under the canoe, causing the canoe to turn the opposite direction.

Posting: holding the paddle in the water out to the side with the forward edge angled opposite to the desired turn direction, usually as a prelude to drawing.

Paddling: by applying power on one side of the canoe, the steerer can influence to a small degree which way the canoe will turn. Paddling also increases the total power moving the canoe forward compared to the other steering methods.

A steerer also skippers the canoe and instructs all other the paddlers as necessary. As an outrigger canoe is a long narrow canoe with the steerer placed at the very end, the steerer must give instructions sufficiently loudly and clearly for the entire crew to hear. From a water safety perspective the steerer should also be amongst the most experienced crew members, and be knowledgeable with the waterways and weather conditions, relevant maritime rules and other safety considerations such as the use of personal floatation devices, rigging of the canoe, placement of paddlers in the various seating positions, and recovery from a huli by righting the canoe and bailing out the water.

Paddlers

Paddlers use single bladed paddles, usually with single or double bent shafts. The paddling stroke is similar to that of most other racing canoe paddling strokes, involving primarily core and lat strength. Generally, each paddler paddles on the opposite side from the paddler in directly front (for example, in an OC6, paddlers in seats 1, 3, and 5 paddle on one side, while paddlers in seats 2 and 4 paddle on the other side). All paddlers switch sides simultaneously on a call from one who is the designated caller. The steerer may paddle either side or switch sides as needed for steering purposes.

Stronger paddlers are typically placed in the middle of the canoe, while paddlers with the most endurance tend to be placed at the front, as the lead paddler sets the pace for the crew. All other paddlers synchronize their strokes to the paddler in front of them (whom they can directly see).

In rough water, it is often desirable to have a paddler with

Tags: New Zealand, personal floatation devices, Boat Types, Dart Tour de Guden, kayak fishing